| | | | | | | |  | Digital Temperature ControlRefrigeration System(1) | | | | | | | | | | | We are looking for Digital Temperature Control for refrigerator. Please email or fax me your offer. Kindly attach your catalogues/brochures as well. Thank you.TROUBLE POSSIBLE CAUSE REMEDY A. The unit's compressor does not run. No electric power to outlet. Turn on electric power outlet. The temperature control is misadjustable or defective. Adjust or replace the temperature control, as necessary. The wires leading to the temperature control are defective or are not connected. Check the internal wiring. Make repairs as necessary. The line voltage is low. Check the line voltage. It must be at least 90% of minimum voltage. The compressor over-load protector(OLP) is defective. Replace the defective over-load protector. The starting relay(PTC) is defective. Replace the starting relay. The compressor is defective. Replace the compressor. Return cooler to authorized service center or factory for repair. B. Water is adequately chilled, but unit runs excessively or continuously. Poor ventilation. Minimum side & rear clearance 4"(10?). The condenser is dirty or restricted. Clean the condenser or relocate the unit to prevent restricting the condenser. The temperature control is defective (the contacts are shorted or the control is not adjusted properly) Replace or adjust the temperature control as necessary. The ambient temperature is high It is normal for the unit to run continuously at high ambient temperatures. C. The unit compressor runs continuously, but there is no cold water. There has been a substantial loss in the sealed system's charge of refrigerant. If refrigerant leak is suspected, return cooler to authorized service center or factory for repair. The compressor is defective. Same as above. |
| | [ Contact Info ] |  Company | ASPT (Singapore) Pte LtdTROUBLE POSSIBLE CAUSE REMEDY A. The unit's compressor does not run. No electric power to outlet. Turn on electric power outlet. The temperature control is misadjustable or defective. Adjust or replace the temperature control, as necessary. The wires leading to the temperature control are defective or are not connected. Check the internal wiring. Make repairs as necessary. The line voltage is low. Check the line voltage. It must be at least 90% of minimum voltage. The compressor over-load protector(OLP) is defective. Replace the defective over-load protector. The starting relay(PTC) is defective. Replace the starting relay. The compressor is defective. Replace the compressor. Return cooler to authorized service center or factory for repair. B. Water is adequately chilled, but unit runs excessively or continuously. Poor ventilation. Minimum side & rear clearance 4"(10?). The condenser is dirty or restricted. Clean the condenser or relocate the unit to prevent restricting the condenser. The temperature control is defective (the contacts are shorted or the control is not adjusted properly) Replace or adjust the temperature control as necessary. The ambient temperature is high It is normal for the unit to run continuously at high ambient temperatures. C. The unit compressor runs continuously, but there is no cold water. There has been a substantial loss in the sealed system's charge of refrigerant. If refrigerant leak is suspected, return cooler to authorized service center or factory for repair. The compressor is defective. Same as above. | | Address | Blk 1024 Yishun Industrial Pk A #01-33 Singapore sg 768763 Singapore | | Phone | 65 - 00 - 62577765 | | Fax | 65 - 00 - 67584412 | | Homepage | www.aruki-aspt.com | | Contact | |
| | | | | | | |
| | | | |